YOKOGAWA 765501 User Manual

16-23
IM 765501-01E
Communication Commands
3
2
1
6
5
4
9
8
7
12
11
10
15
14
13
18
17
16
16
Index
App
16.2.4 Sweep Commands (SWEep Group)
:SWEep:TRIGger
Function Starts the sweep operation.
Syntax :SWEEp:TRIGger
Example :SWE:TRIG
Description This command is valid when the sweep pattern
is set to sweep (:SOURce:MODE SWEep) or
program sweep (:SOURce:MODE LIST).
:SWEep:COUNt
Function Sets the sweep repeat count or queries the
current setting.
Syntax :SWEEp:COUNt <Integer>|INFinity|
MINimum|MAXimum
<Integer> = Sets the sweep repeat count to the
specified value.
INFinity = Sets the sweep repeat count to
infinity.
MINimum = Sets the sweep repeat count to the
minimum value.
MAXimum = Sets the sweep repeat count to the
maximum value.
:SWEEp:COUNt? [MINimum|MAXimum]
No parameter = Queries the current value.
MINimum = Queries the minimum value.
MAXimum = Queries the maximum value.
→ <Integer> = Current count
INF = Currently set to infinity
Example :SWE:COUN 10
:SWE:COUN INF
:SWE:COUN MAX
:SWE:COUN?
:SWE:COUN? MAX
Description This setting is used when the sweep pattern is
set to sweep (:SOURce:MODE SWEep) or
program sweep (:SOURce:MODE LIST).
:SWEep:LAST
Function Sets the sweep termination mode (keep level or
return to initial level) or queries the current
setting.
Syntax :SWEEp:LAST KEEP|RETurn
KEEP = Retains the last level.
RETurn = Returns to the level before starting.
:SWEep:LAST?
→ KEEP = Currently set to keep (retains the
last level)
RET= Currently set to return (reset to the
level before starting)
Example :SWE:LAST KEEP
:SWE:LAST?
Description This setting is used when the sweep pattern is
set to sweep (:SOURce:MODE SWEep) or
program sweep (:SOURce:MODE LIST).
16.2 Commands

YOKOGAWA 765501 Specifications

General

Brand	YOKOGAWA
Model	765501
Category	Measuring Instruments
Language	English