YOKOGAWA 765501 - Sample Programs

16-49
IM 765501-01E
Communication Commands
3
2
1
6
5
4
9
8
7
12
11
10
15
14
13
18
17
16
16
Index
App
16.4 Sample Programs
Notes on Using the Sample Programs
YOKOGAWA assumes no liability for any problems that may occur as a result of using
the sample programs.
16.4.1 Before Programming
Applicable Model and Language
Model: Windows PC
Language: Visual Basic Version 5.0 Professional Edition or later.
GPIB board: AT-GPIB/TNT IEEE-488.2 by National Instruments.
Setting Up Visual Basic
Standard modules used: Niglobal.bas
Vbib-32.bas
Setting Up the GS610
GP-IB
The sample programs given in this chapter use a GP-IB address of 1 for the GS610.
Set the GP-IB address to 1 according to the procedures described in section 13.4.
Or, change the ADDRESS definition in GpibLib.bas.