YOKOGAWA 765501 - Chapter 10 BNC Input;Output and External Input;Output; Setting the Input;Output Signals of the BNC Input;Output Terminal and the External Input;Output Connector

10-1
IM 765501-01E
BNC Input/Output and External Input/Output
3
2
1
6
5
4
9
8
7
12
11
10
10
15
14
13
18
17
16
Index
App
10.1 Setting the Input/Output Signals of the BNC
Input/Output Terminal and the External Input/
Output Connector
Procedure
MEASURE
STORE
AUTO
RANGE
MENU
MATH
NULL
COMPARE
MEASURE
VALUE
LOCAL
POWER
MISC
TIME
KEY LOCK
SHIFT
V
I
MODE
AUTO
RANGE
LIMIT
VS IS
MENU
SOURCE
OUTPUT CONTROL
SWEEP
START
ZERO
SOURCE
TRIG
MODE
OUTPUT
RANGE
Ω
RECALL
DISPLAY
ESC
• To exit the menu during operation, press
ESC at the upper left of the operation
panel.
• In the procedural explanation below, the
phrase “rotary knob, numeric keys, <,
and >” are used to refer to the operation
of selecting or setting items or entering
values using the rotary knob, numeric
keys, , and keys (BS key and
right arrow key). For details on the
operation using the rotary knob, numeric
keys, , and , see sections 3.8 or
3.9.
1. Press MISC to display the MISC menu.
2. Press the System soft key to display the System menu.
3. Press the External I/O soft key to display the External I/O menu.
To set the BNC input/output terminal, proceed to step 4. To set the external input/
output connector, proceed to step 13.
Setting the BNC Input Terminal
4. Press the BNC In soft key to display the BNC In menu.
5. Select the signal to be applied to the BNC input terminal from Trig, Sweep, and
Ctrl.
If you select Ctrl, proceed to step 6. If you select Trig or Sweep, proceed to
step 8.
6. If you select Ctrl in step 5, a Type menu appears for you to select the input
control signal.
Press the Type soft key.
7. Press the Intlock, Output, or Zero soft key to select the signal.
8. Press ESC to return to the External I/O menu.
Chapter 10 BNC Input/Output and External Input/Output