11-2 IM 765501-01E
Explanation
Saving to the Volatile Disk (GS610RAM)
The setup file (Setup.txt) is stored to the GS610RAM. If a setup file already exists, it is
overwritten.
This setup file is used to transfer the file to a PC.
Saving to the Non-Volatile Disk (GS610ROM)
The setup file (Setup1 to Setup4.txt) are saved to the SETUP folder on the GS610ROM.
Up to four setup files can be saved. If a different file is saved to a number already
containing a setup file, it is overwritten.
Note
• The setup file is a text file containing a sequence of command mnemonics. The contents
can be edited on a PC.
• The file stored in the SETUP directory on the GS610ROM can be renamed on the PC.
However, do not rename the default setup file (Default.txt).
<<Corresponding Command Mnemonic>>
:SYSTem:SETup:SAVE
*SAV
11.1 Saving the Setup Data
To Next Page
Loading...
