YOKOGAWA 765501 User Manual

16-25
IM 765501-01E
Communication Commands
3
2
1
6
5
4
9
8
7
12
11
10
15
14
13
18
17
16
16
Index
App
:SENSe:AZERo[:STATe]
Function Sets the auto zero state (ON or OFF) or queries
the current setting.
Syntax :SENSe:AZERo[:STATe] 1|0|ON|OFF
1 or ON = Turns auto zero ON.
0 or OFF = Turns auto zero OFF.
:SENSe:AZERo[:STATe]?
→ 1 = Currently ON
0 = Currently OFF
Example :SENS:AZER:STAT ON
:SENS:AZER:STAT?
:SENSe:AZERo:EXECute
Function Executes auto zero.
Syntax :SENSe:AZERo:EXECute
Example :SENS:AZER:EXEC
:SENSe:AVERage[:STATe]
Function Sets the average state (ON or OFF) or queries
the current setting.
Syntax :SENSe:AVERage[:STATe] 1|0|ON|OFF
1 or ON = Turns averaging ON.
0 or OFF = Turns averaging OFF.
:SENSe:AVERage[:STATe]?
→ 1 = Currently ON
0 = Currently OFF
Example :SENS:AVER:STAT ON
:SENS:AVER:STAT?
:SENSe:AVERage:MODE
Function Sets the average mode (block or moving
average) or queries the current setting.
Syntax :SENSe:AVERage:MODE BLOCk|MOVing
BLOCk = Sets the average mode to block.
MOVing = Sets the average mode to moving.
:SENSe:AVERage:MODE?
→ 1 = Currently set to block
0 = Currently set to moving
Example :SENS:AVER:MODE MOV
:SENS:AVER:MODE?
:SENSe:AVERage:COUNt
Function Sets the average count or queries the current
setting.
Syntax :SENSe:AVERage:COUNt <Integer>|
MINimum|MAXimum
<Integer> = Sets the average count to the
specified value.
MINimum = Sets the average count to the
minimum value.
MAXimum = Sets the average count to the
maximum value.
:SENSe:AVERage:COUNt? [MINimum|
MAXimum]
No parameter = Queries the current value.
MINimum = Queries the minimum value.
MAXimum = Queries the maximum value.
→ <Integer>
Example :SENS:AVER:COUN 10
:SENS:AVER:COUN MAX
:SENS:AVER:COUN?
:SENS:AVER:COUN? MAX
:SENSe:ACHange
Function Sets the auto V/I mode (ON or OFF) or queries
the current setting.
Syntax :SENSe:ACHange 1|0|ON|OFF
1 or ON = Turns auto V/I mode ON.
0 or OFF = Turns auto V/I mode OFF.
:SENSe:ACHange?
→ 1 = Currently ON
0 = Currently OFF
Example :SENS:ACH ON
:SENS:ACH?
Description Auto V/I mode automatically changes the
measurement function when a limiter is
activated. For details, see section 7.7, “Turning
Auto V/I ON/OFF.”
:SENSe:RSENse
Function Sets the four-wire measurement (remote sense)
(ON or OFF) or queries the current setting.
Syntax :SENSe:RSENse 1|0|ON|OFF
1 or ON = Turns the four-wire measurement
ON.
0 or OFF = Turns the four-wire measurement
OFF (two-wire measurement).
:SENSe:RSENse?
→ 1 = Currently ON (four-wire measurement)
0 = Currently OFF (two-wire measurement)
Example :SENS:RSEN ON
:SENS:RSEN?
16.2 Commands

YOKOGAWA 765501 Specifications

General

Brand	YOKOGAWA
Model	765501
Category	Measuring Instruments
Language	English