YOKOGAWA 765501 - Page 26

1-7
IM 765501-01E
Part Names and Functions
3
2
1
6
5
4
9
8
7
12
11
10
15
14
13
18
17
16
Index
App
OUTPUT CONTROL Group
Mode
***
Last
Rtn Keep
Repeat
***
Start
Value
Stop
Value
Step
Value
Step
Count
Int Ext Imm
TrigMode
Off Linear Log Program
SweepMode
Generates a manual trigger (section 4.1)
Selects the sweep mode
(off, linear, log, or program)
(sections 6.1 and 6.2)
Switches the sweep termination mode (return on keep) (section 6.3)
Sets the sweep repeat count (section 6.4)
Sets the sweep start value (section 6.1)
Sets the sweep stop value (section 6.1)
Starts the sweep operation (section 6.5)
Turns ON/OFF the output mode (section 5.7)
Turns ON/OFF the zero state (section 5.8)
Select
File
START
ZERO
TRIG
MODE
TRIG
MODE
OUTPUT
SHIFT
SWEEP
Sets the sweep step value (displayed only when linear sweep is selected)
(section 6.1)
Selects the trigger mode (internal, external, or immediate) (section 4.1)
Sets the sweep step count (displayed only when log sweep is selected)
(section 6.1)
Selects the pattern file (displayed only when program sweep is selected)
(section 6.2)
1.4 Key Groups and Menus