3-16 IM 765501-01E
Setting the Time Difference from GMT (Greenwich Mean Time)
4. Press the Time Zone soft key.
5. Press the Edit soft key.
6. Use the < and > keys to move the cursor to the desired position.
7. Use the rotary knob or numeric keys to enter the time difference.
8. If you use the numeric keys, press the Set soft key to confirm the setting.
Explanation
Setting the Date and Time
• Date (Year/Month/Day)
Set the year, month and day.
• Time (Hour/Minute/Second)
Set the time using a 24-hour clock.
Note
• The date and time settings are backed up with the lithium battery when the power is
turned OFF.
• Leap year information is retained.
Setting the Time Difference from GMT (Greenwich Mean Time)
Set the time difference in the range of –12 hours 00 minutes to 13 hours 00 minutes.
For example, Japan standard time is ahead of GMT by 9 hours. In this case, set Hour to
9 and Minute to 00.
Checking the Standard Time
Check the standard time for the region where the GS610 is to be used using one of the
following methods.
• Check the date and time setting on your PC.
• Check the site at the following URL: http://www.worldtimeserver.com/
Note
The GS610 does not support daylight savings time. To set the daylight savings time, adjust
the time difference from GMT.
<<Corresponding Command Mnemonic>>
:SYSTem:CLOCk:DATE
:SYSTem:CLOCk:TIME
:SYSTem:CLOCk:TZONe
3.7 Setting the Date, Time, and the Time Difference from GMT (Greenwich Mean Time)
To Next Page
Loading...
