6-2 IM 765501-01E
Setting the Stop Value
7. Press the Stop Value soft key.
8. Use the rotary knob or numeric keys and < and > keys to set the stop
value.
9. If you use the numeric keys, press a soft key corresponding to the desired
unit or the Enter soft key to confirm the setting.
Setting the Step Value
10. Press the Step Value soft key.
11. Use the rotary knob or numeric keys and < and > keys to set the step
value.
12. If you use the numeric keys, press a soft key corresponding to the desired
unit or the Enter soft key to confirm the setting.
Setting the Log Sweep
3. Press the Log soft key. The SWEEP key illuminates. If you set the Sweep
mode to Off, the key turns OFF.
Setting the Start Value
4. Press the Start Value soft key.
6.1 Setting the Linear or Log Sweep
To Next Page
Loading...
