11-20
IM 701310-01E
Explanation
The DL9000 searches waveforms depending on whether or not the source waveform is
in the polygonal zone you created on a PC and loaded onto the DL9000.
Search Logic
• AND: Searches for history memory waveforms that meet all search conditions 1 to 4.
• OR: Searches for history memory waveforms that meet any of the search conditions
from 1 to 4.
Search Condition Number
You can choose to configure a search condition from 1 to 4.
Search Source Window
• Main: Sets the main waveform as the source.
• Zoom1: Sets the waveforms in zoom box 1 as the source.
• Zoom2: Sets the waveforms in zoom box 2 as the source.
• XY1: Sets the waveforms in XY
window 1 as the source.
• XY2: Sets the waveforms in XY window 2 as the source.
Search Source Waveform
You can choose a waveform from CH1 to CH4 and from M1 to M4.
Search Criterion
• IN: Searches for history waveforms that are in the search zone.
• OUT: Searches for history waveforms that are outside the search zone.
• X: Not used for the search.
11.4 Searching History Waveforms Using a Polygonal Zone (POLYGON History Search)
To Next Page
Loading...
