YOKOGAWA DL9040L User Manual

15-24
IM 701310-01E
15.7 Using a PC to Monitor the DL9000 and Change
Its Settings (Web Server)
Procedure
RESET SET
7 8 9 BS
PRINT
FILE
SHIFT
SYSTEM
EXP
CLEAR
M
MENU
D E F X
k m
u n p
4 5 6
1 2 3
0
+/-
CA B
1.
Press SYSTEM.
On Models without the LXI Option (/C8 and /C10)
2.
Press these soft keys: Network > File/Web Server Setup > Type > Web.
The Certification menu appears.
On Models with the LXI Option (/C9 and /C12)
2.
Press these soft keys: Network > Server Setup > Type > Web.
The Certification menu appears.
Setting the Web Server Mode to Enable (ON) or Disable (OFF)
Authentication
3.
Press the Mode soft key to select ON or OFF.
Setting the User Name and Password for Connecting to the DL9000 (When
Mode is set to ON)
4.
Press the User Name soft key.
A display for entering the user name appears.
5.
Enter a user name using up to 30 characters.
6.
Press the Password soft key.
A display for entering the password appears.
7.
Enter the password using up to 15 characters.
Note
For information about how to operate the keyboard (soft keyboard), see section 4.2.
Applying the Settings
8.
Press the Entry soft key.
The settings that you specified are applied.
If you do not press Entry, the settings that you specified will not be applied.
Without the LXI option
With the LXI option

YOKOGAWA DL9040L Specifications

General

Brand	YOKOGAWA
Model	DL9040L
Category	Test Equipment
Language	English