YOKOGAWA DL9040L User Manual

13-10
IM 701310-01E
13.5 Saving/Loading the Measurement Data
CAUTION
Do not remove the storage medium (disk) or turn OFF the power when the access
indicator is blinking. Doing so can damage the storage medium or destroy the data
on the medium.
Procedure
RESET SET
7 8 9 BS
PRINT
FILE
SHIFT
SYSTEM
EXP
CLEAR
M
MENU
D E F X
k m
u n p
4 5 6
1 2 3
0
+/-
CA B
Saving the Measurement Data
1.
Press FILE.
Selecting the Save Destination Storage Media/Directory
2.
Use the rotary knob to select the save destination storage medium.
3.
Press the Open soft key to confirm the storage medium.
When saving to a directory in the storage medium, select the directory in the same manner
as described above, and then press the
Open
soft key to confirm the directory.
The selected medium/directory is displayed in “Path=......” located in the upper-left of the
File List window.
Press the Up soft key to move to the parent directory.

YOKOGAWA DL9040L Specifications

General

Brand	YOKOGAWA
Model	DL9040L
Category	Test Equipment
Language	English