YOKOGAWA DL9040L User Manual

15-20
IM 701310-01E
15.5 Using SNTP to Set the Date and Time
Procedure
RESET SET
7 8 9 BS
PRINT
FILE
SHIFT
SYSTEM
EXP
CLEAR
M
MENU
D E F X
k m
u n p
4 5 6
1 2 3
0
+/-
CA B
1.
Press SYSTEM.
On Models without the LXI Option (/C8 and /C10)
2.
Press these soft keys: Network > Net Time Adjust Setup.
A menu appears for adjusting the time using SNTP.
On Models with the LXI Option (/C9 and /C12)
2.
Press these soft keys: Network > Client Setup > Net Time Adjust Setup.
A menu appears for adjusting the time using SNTP.
3.
Press the Time Server soft key.
A window appears for setting the NTP/SNTP server IP address or host name.
4.
Enter the IP address or host name of the NTP/SNTP server.
5.
Press the Power On Exec soft key, to select ON or OFF.
6.
With the rotary knob, set Time Out in the range 1 to 60 (s).
7.
To set the date and time, Press the Exec soft key.
The necessary information is obtained from the NTP/SNTP server to set the date and time
on this unit.
Without the LXI option
With the LXI option With the LXI option
Note
For information about how to operate the keyboard (soft keyboard), see section 4.2.
Explanation
Time data is obtained over the network from an NTP/SNTP server, and used to set the
date and time on this unit.
If Power On Exec is set to ON, the date and time information is obtained from the NTP/
SNTP server connected to the network each time the unit is powered on.
Note
The time difference from universal time (GMT) must be correctly set.

YOKOGAWA DL9040L Specifications

General

Brand	YOKOGAWA
Model	DL9040L
Category	Test Equipment
Language	English