11-34
IM 701310-01E
Explanation
The DL9000 searches waveforms depending on whether or not the computed values of
the XY waveform area are within the range that you set.
Search Logic
• AND: Searches for history memory waveforms that meet all search conditions 1 to 4.
• OR: Searches for history memory waveforms that meet any of the search conditions
from 1 to 4.
Search Condition Number
You can choose to configure a search condition from 1 to 4.
Search Source Window
You can set the search window to XY1 (the area of the XY waveform of Window1) or XY2
(the area of the XY waveform of Window2).
Upper and Lower Limits of the FFT Parameters to Search
Selectable range of upper and lower limits: –1.0E+31 to 1.0E+31
Search Criterion
• IN: Searches for history waveforms whose XY waveform area are within the upper
and lower limits.
• OUT
: Searches for history waveforms whose XY waveform area are outside the upper
and lower limits.
• X: Not used for the search.
11.7 Searching History Waveforms Using XY Waveform Parameters (XY History Search)
To Next Page
Loading...
