13-15
IM 701310-01E
Saving and Loading Measurement Data
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
App
Index
Decimating and Saving Data
Saves the data by decimating the data.
The data that has been decimated and saved cannot be loaded to the acquisition
memory of the DL9000.
Compressing and Saving Data
You can select whether to P-P compress the waveform data before saving.
The data that has been compressed and saved cannot be loaded to the acquisition
memory of the DL9000.
Compressed Size
You can select the compressed size from the following:
2.5 k, 6.25 k, 12.5 k, 62.5 k, 125 k, 250 k, 625 k, 1.25 M, 2.5 M, 6.25 M
If the record length and the compressed size are the same, the data is saved without
compression.
Storage Medium and Directory
Storage media in which saving and loading are possible are displayed on the File List
window.
Display Examples of Storage Media
Same as the explanation given in “Display Examples of Storag
e Media” of section
13.4.
File Name and Comment
Same as the explanations given in “File Name” and “Comment” in section 13.4.
Specifying the Files to Be Displayed in the File List Dialog Box
See the explanation “Specifying the Files to Be Displayed in the File List Dialog Box” in
section 13.4.
Note
• An error occurs if a key other than the Abort key is pressed while saving or loading a file.
When measurement data is loaded, the accumulation setting is always OFF.
• If you change the extension of the saved data (using a PC, for example), the file can no
longer be loaded.
•
A total of 2500 directories and files can be displayed in the file list. If there are more than
2500 directories and files in a single directory, a total of 2500 files and directories will be
displayed, but it is not possible to specify which directories and files are displayed.
13.5 Saving/Loading the Measurement Data
To Next Page
Loading...
Need help?
General
