YOKOGAWA DL9040L User Manual

15-6
IM 701310-01E
On Models with the LXI Option (/C9 and /C12)
RESET SET
7 8 9 BS
PRINT
FILE
SHIFT
SYSTEM
EXP
CLEAR
M
MENU
D E F X
k m
u n p
4 5 6
1 2 3
0
+/-
CA B
1.
Press SYSTEM.
2.
Press these soft keys: Network > Setup.
The TCP/IP setup menu appears.
DHCP ON/OFF
3.
Press the DHCP soft key to select ON or OFF.
If you set the Mode to Manual, proceed to step 4.
If you set the Mode to Auto, you do not have to set the IP address, subnet mask and default
gateway.
• To set the DNS, proceed to step 10.
• If you do not wish to set up the DNS, check the network cable connection and restart the
DL9000. The IP address, subnet mask, and default gateway are automatically configured.
Setting the IP Address
If DHCP was set to OFF, set the IP address.
4.
Press the IP Address soft key.
5.
Enter a value in the range of 0 to 255 as described in section 4.2.
Setting the Subnet Mask
If DHCP was set to OFF, set the subnet mask.
6.
Press the Net Mask soft key.
7.
Enter a value in the range of 0 to 255 as described in section 4.2.
15.2 Setting Up the TCP/IP

YOKOGAWA DL9040L Specifications

General

Brand	YOKOGAWA
Model	DL9040L
Category	Test Equipment
Language	English