YOKOGAWA MX100 User Manual

5-4
IM MX100-01E
Operation Mode Transitions
Idle
Idle
Monitoring
Idle
Idle
Idle
Idle
Power
Off On
Measure-
ment
Measure-
ment
Start
Start
Stop
Stop
BackupBackup
Measure
Measure
Measure Measure
(1s)
Recording
operation
Recording
(Record start) (Record stop)
Measurement and Control of Data Saving to the CF Card Using the CF Card
Control Switch
You can start and stop measurement and saving of data to the CF card by holding down
the CF card control switch for five seconds (5s-SW).
Changing Modes with 5s-SW
CF card not inserted
CF card inserted
5s-SW
5s-SW
Idle Measrue
AlarmDO
5s-SW
Immediately
(after 1 s)
5s-SW
Idle Measrue
AlarmDO
Backup
CF
AlarmDO
If measurement fails to start, [ ] appears on the 7-segment LED for one second.
5.3 Explanation of Functions

YOKOGAWA MX100 Specifications

General

Brand	YOKOGAWA
Model	MX100
Category	Data Loggers
Language	English