5-5
IM MX100-01E
Dual Save Functions (/DS option only)
CAUTION
Do not perform the 5s-SW operation while the PC software is running. A PC
software operation error will occur.
Note
• After starting measurement and saving data to the CF card using the CF card control switch,
you can connect to the PC software.
• The CF card can only be removed or inserted while in idle mode.
Operation When the CF Card Is Not Inserted
• Normal Operation
Mode
Date
AlarmDO
Power On
5s-SW
Measure
Update Update
Idle
5s-SW
5s-SW
(Hold)
Hold
• Operation When Power Cut and PC Software Connected
Connect to PC software
Save on PC
Record
(Start)
Auto restore
AlarmDO
PC File
Stop Start
Power On 5s-SW
Data
AlarmDO
Mode
Power Off On
MeasureMeasure Measure
UpdateUpdate Update
Hold
Data
Idle
5.3 Explanation of Functions
To Next Page
Loading...
