YOKOGAWA MX100 User Manual

1-28
IM MX100-01E
1.10 Operation of the 8-CH Medium-Speed Analog Output Module and the 8-CH Medium Speed PWM Output Module
Steady Output Operation
Output Operation While Communication Is Connected
Communication Connection Status Output Operation
Comm. connects (intial connection after power ON) Operation upon startup
Comm. connects (disconnected and restored for Holds the output value
the 2nd or more time) (last output value)
Communication disconnected normally Holds the output value
(last output value)
Output Operation according to the Measurement Status and Transmission
Output Status
Output Setting Status Output Operation
Trans.output Measstop→meas.start Startstrans.output/
whthin units holds within units output value
(depends on trans. output
execution on/off )
on: transmission output starts
off: holds output value
 Measuring→meas.stop Holdsoutputvalue(lastoutput
value)
 Measstopping Trans.outputexec.on*→off* Holdsoutputval.(nochng.)
  Trans.outputexecon→off Holdsoutputval.(nochng.)
 Measuring Trans.outputexecoff→on Startstrans.output
  Trans.outputexecon→off Holdsoutputval.(lastval.)
Trans.output Measstop→measstart Startscommandoutput
or holds
between units output value
(cmd. output) (depends on trans output exec.
on/off status)
on: transmission output starts
off: output value held
 Measuring→measstop Holdstheoutputvalue
(last output value)
 Measstopping Trans.outputexecoff→on Holdsoutputval.(nochng.)
  Trans.outputexecon→off Holdsoutputval.(nochng.)
 Measuring Trans.outputexecoff→on Commandoutput 
  Trans.outputexecon→off Holdsoutputval.
(last output value)
Manualoutput Measstop→measstart Noeffect
(cmd.output) Measuring→measstop Noeffect
 Measstopping Trans.outputexecoff→on Noeffect
  Trans.outputexecon→off Noeffect
 Measuring Trans.outputexecoff→on Noeffect
  Trans.outputexecon→off Noeffect 
Patternoutput Measstop→measstart Noeffect
(cmd.output) Measuring→measstop Noeffect
 Measstopping Trans.outputexecoff→on Noeffect 
  Trans.outputexecon→off Noeffect 
 Measuring Trans.outputexecoff→on Noeffect
  Trans.outputexecon→off Noeffect
* on: enabled off: disabled
Transmission output execute enabled: when “Transmit” under the Action menu of the PC
software is selected
Transmission output execute disabled: when “Transmit” under the Action menu of the PC
software is not selected

YOKOGAWA MX100 Specifications

General

Brand	YOKOGAWA
Model	MX100
Category	Data Loggers
Language	English