YOKOGAWA MX100 User Manual

5-10
IM MX100-01E
• Application Example 2
FileNo.=3
Info
Backup
ON
Idle
Start
Stop
Backup
OFF
(60s)
Measure
Stop
Start
No.=4
Start
Measure
Idle
Idle
GetData
Data Handling
Mode
Data
CF Write
CF File
MX100/
Daewin
API
aplication
Backup Backup
Start StartStop Stop
Save on CF
You can set recording status settings before and after measurement starts or stops
(Backup ON/OFF). Saving of data to the CF card can be linked with the Start/Stop
function.
Note
The file number of a data file saved to the CF card using an MX100/DARWIN API application is
the consecutive number assigned during use of the API application.
Dual Save Function
If the dual save function is used, command output of digital output, analog output, and
PWM output may experience delay when data is being saved to the CF card.
When stopping recording in particular, a delay of several seconds may occur due to the
save stop operation.
5.3 Explanation of Functions

YOKOGAWA MX100 Specifications

General

Brand	YOKOGAWA
Model	MX100
Category	Data Loggers
Language	English