ZCube-21 User Guide
DOC-USR-0253-01
______________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8
th
ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
5.9 Record Snapshot
ZCube-21 supports taking a snapshot while streaming video.
By default, the snapshot will be at the native ZCube-21 camera resolution (3840x2160) with an option to
change the size of image.
There are two ways to record a snapshot:
(1) Using Camera Tab (see section 7.2)
(2) Using ZCube-21 URL as follows:
1. Find the IP address of the camera (using Local IP Address field in the System
Setup tab or the ZFinder utility described in Section 5.2)
2. Type the URL into a Web browser as: http://IP Address of ZCube-21/snapshot.cgi
Example if the camera IP address is 192.168.0.19 the URL to download a snapshot
is http://192.168.0.19/snapshot.cgi
3. The snapshot file will be downloaded with a default file name as:
snap_chn0_YYYY_MM_DD_HH_MM_SS.JPG, where YYYY_MM_DD_HH_MM_SS are
Year, Month, Day, Hour, Minute and Second.
4. To Change image size, use the Size parameter in URL, for example, in order to
change the image size to 1280x720 on above IP address type this:
http://192.168.0.19/snapshot.cgi?size=1280x720.
To Next Page
Loading...
