Z3 Technology ZCube-21 - The User Presets Tab

ZCube-21 User Guide
DOC-USR-0253-01
______________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8
th
ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
51
Time Settings
Click this button to access Time configuration
options.
Enable Time
Service
None, Network Time
Protocol (NTP), IEEE 1588
PTP
Sets desired time service on the unit.
Time Zone
America/Chicago
Allows for selection of desired time zone.
NTP Servers
pool.ntp.org
Address of desired server for NTP.
PTP
Server/Client
Role
Auto, Client only, Server only
Sets the PTP role; see DOC-USR-0223-0x for
details.
Enable NTP
True
False
Sets whether Network Time Protocol (NTP) is
enabled.
Time Zone
America/Chicago
Allows for selection of desired time zone.
NTP Servers
(128.138.141.172)
Address of desired server for NTP.
Update device
firmware Button
Access the Software Updater to update the
firmware on your device. An image file of the
desired firmware is needed.
Download
device logs
Button
Extract a set of diagnostic logs that can be
provided to Z3 in the event of an issue to be
reported. The resulting file is saved on the PC
with the user interface open.
Reboot Button
Restarts the unit without the need to disconnect
power.
9.2 The User Presets Tab
Button
Notes
new
Define a new configuration file.
Up to nine configurations can be created.
rename
Rename a configuration file.
delete
Delete a configuration file.