Z3 Technology ZCube-21 - Onvif Profile S and T

ZCube-21 User Guide
DOC-USR-0253-01
______________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8
th
ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
36
6.0 ONVIF

PROFILE S AND T
ZCube-21 software is compliant with ONVIF Profile S and T.
3
ONVIF is enabled by default. ONVIF Clients should be able to discover the ZCube-21 using WS-Discovery.
(1) Open your ONVIF client program.
(2) Use ONVIF device discovery to find the ZCube-21 on the network.
Note: For manual discovery of ONVIF, use the ZCube-21 IP address and the port 8080 as shown in the following URL
example: http://192.168.0.120:8080/onvif/device_service.
(3) Enter your valid user ID and password.
Note: If you are logging onto the camera for the first time, the default user ID is admin and the default password is
admin.
3
ONVIF promotes standardized interfaces for interoperability of IP-based security products. For more information,
visit www.onvif.org.