2 - 2 DS8178 Digital Scanner Product Reference Guide
Medium beep
(or as configured)
Green flash A bar code was successfully decoded. (See
User
Preferences Parameter Defaults on page 5-2
for
programming beeper sounds.)
Low/low/low/extra low
beeps
Red Parity error.
Four long low beeps Red A transmission error was detected in a scanned
symbol. The data is ignored. This occurs if a unit is
not properly configured. Check option setting.
Five long low beeps Red Conversion or format error.
None Red (fast blink)) on
trigger pull
Scanner is disabled by a host command to the
scanner.
High None A <BEL> character is received over RS-232.
Wireless Operation
Low, high, low, high Red Out of batch storage memory, unable to store new bar
code.
Radio Indications
Low None Scanner inserted into a cradle (may be disabled).
Low, high Green Bluetooth connection established.
High, low Red Bluetooth disconnection event.
Long low, long high Red Bluetooth page timeout; remote device is out of
range/not powered.
Long low, long high, long
low, long high
None Bluetooth connection attempt was rejected by remote
device.
None Green (fast blink) Bluetooth attempting reconnection.
Five high None Bluetooth attempting reconnection (default is
disable).
Six high Blue (fast/fast/slow) Paging state indication.
Table 2-1 Digital Scanner Beeper and LED Indications (Continued)
Beeper Sequence LED Indication
To Next Page
Loading...
Need help?
General
Weight and Dimensions
