Zebra FX7500 Integrator Guide

4 - 10 FX7500 RFID Reader Integrator Guide
• Communication - see Communication Settings on page 4-31
•
LLRP - see Configure LLRP Settings on page 4-34
•
SNMP - see SNMP Settings on page 4-35
•
Wireless - see Wireless Settings on page 4-36
•
Services - see Network Services Settings on page 4-37
• Date/Time - see System Time Management on page 4-38
• IP Sec - see IPV6 IP Sec on page 4-39
• Change Password - see Change Password on page 4-40
• GPIO - see GPIO on page 4-41
• Applications - see Applications on page 4-42
• Profiles - see Reader Profiles on page 4-43
• Firmware - see Firmware Version/Update on page 4-44
•
Update - see Firmware Update on page 4-45
• Commit/Discard - see Commit/Discard on page 4-45
• System Log - see System Log on page 4-46
•
Configure - see Configure System Log on page 4-47
• Diagnostics - see Reader Diagnostics on page 4-48
• Shutdown - see Shutdown on page 4-49
• Logout - click Logout to immediately log out of the Administrator Console.
Status
Click Status on the selection menu to view the Reader Status window. This window displays information about
the reader and read points (antennas).
Figure 4-7 Reader Status Window

Zebra FX7500 Specifications

General

Interface	USB
Product color	White
LED indicators	Activity, Power, Status
Housing material	Aluminium, Metal, Plastic
Battery type	-
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 55 °C
Operating relative humidity (H-H)	5 - 95 %
Harmonized System (HS) code	84719000

Weight and Dimensions

Depth	43.2 mm
Width	149.9 mm
Height	195.6 mm
Weight	860 g