Zebra FX7500 Integrator Guide

Administrator Console 4 - 37
Network Services Settings
Select Services to view the Configure Network Service Settings window.
Figure 4-26 Configure Network Service Settings Window
The reader supports the following network services.
• Web Server - Configures the web server in either HTTP (unsecure) or HTTPS (secure) mode.
• Shell - Sets the shell to SSH (secure) mode or a disabled state.
• File Server - Sets the file server to either FTP (unsecure) or FTPS (secure) mode.
• Disable IPV6 Stack - Select this to disable the reader's IPV6 stack.
• Receive RA packets - This option is only valid when the IPV6 stack is enabled. Enable this to allow IPV6
IP configuration through RA packets; otherwise obtain the IP via DHCP in the Communication window or
assign statically.
NOTE You must click Commit to update the service configuration (see Save Changes.) If the Commit is not
successful, the system indicates the problem and allows correcting it by repeating the operation.

Zebra FX7500 Specifications

General

Interface	USB
Product color	White
LED indicators	Activity, Power, Status
Housing material	Aluminium, Metal, Plastic
Battery type	-
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 55 °C
Operating relative humidity (H-H)	5 - 95 %
Harmonized System (HS) code	84719000

Weight and Dimensions

Depth	43.2 mm
Width	149.9 mm
Height	195.6 mm
Weight	860 g