4 - 14 FX7500 RFID Reader Integrator Guide
Event Statistics
Select Events to view the Events Statistics window. This window provides options to view the statistics of
events.
Figure 4-11
Event Statistics Window
•
AmbientTemperatureHighAlarm - Displays the number of events raised for ambient temperature high
alarm.
•
AmbientTemperatureCriticalAlarm - Displays the number of events raised for ambient temperature
critical alarm.
•
PATemperatureHighAlarm - Displays the number of events raised for PA temperature high alarm.
•
PATemperatureCriticalAlarm - Displays the number of events raised for PA temperature critical alarm.
•
ForwardPowerHighAlarm - Displays the number of events raised for forward power high alarm.
•
ForwardPowerLowAlarm - Displays the number of events raised for forward power low alarm.
•
ReversePowerHighAlarm - Displays the number of events raised for reverse power high alarm.
•
EchoThresholdAlarm - Displays the number of events raised for echo threshold alarm.
•
DatabaseWarning - Displays the number of warning events raised whenever the radio tag list buffer is
almost full.
•
DatabaseError - Displays the number of events raised when the radio tag list buffer is full.
•
GPIInformation - Displays the number of events raised for radio GPI events.
•
Reset Statistics - Resets all the success and failure counts for all the read points.
•
Refresh Interval - Sets the refresh interval (in seconds) for this window. The statistics information for the
chosen read point is refreshed every
N seconds (where N is the set refresh interval). The minimum value
is 10 seconds and the maximum value allowed is 86,400 seconds. Input a new value and click
Change to
set a new interval.