Zte ZXR10 2920 - Table 101 Set Igmp Snooping Query Vlan Command; Table 102 Set Igmp Snooping Query Interval Command; Table 103 Set Igmp Snooping Response Interval Command

Chapter 7 Service Configuration
Confidential and Proprietary Information of ZTE CORPORATION 93
TABLE 101 SET IGMP SNOOPING FASTLEAVE COMMAND
Format Mode Function
set igmp
snooping
fastleave
{enable|disable}
Global
config
This Enable/Disable the IGMP
fastleave function
Result: This Enable/Disable the IGMP fastleave function.
6. To set the last member snooping interval, use
command set igmp snooping last-member-query <10-
250> in global configuration mode.
Result: This sets the last member snooping interval.
7. To Enable/Disable the IGMP snooping function for
the specified VLAN, use command set igmp snooping
query vlan <vlanlist> {enable|disable} in global
configuration mode. This is shown in
Table 101.
TABLE 101 SET IGMP SNOOPING QUERY VLAN COMMAND
Format Mode Function
set igmp
snooping query
vlan <vlanlist>
{enable|disable}
Global
config
This Enable/Disable the IGMP
Snooping function for the
specified VLAN
Result: This Enable/Disable the IGMP Snooping function for
the specified VLAN.
8. To set the snooping interval, use command set igmp
snooping query-interval <10-2147483647> in global
configuration mode. This is shown in
Table 102.
TABLE 102 SET IGMP SNOOPING QUERY INTERVAL COMMAND
Format Mode Function
set igmp
snooping
query-interval
<10-
2147483647>
Global
config
This sets the snooping interval
Result: This sets the snooping interval.
9. To set the snooping interval, use command set igmp
snooping response-interval <10-250> in global
configuration mode. This is shown in
Table 103.
TABLE 103 SET IGMP SNOOPING RESPONSE INTERVAL COMMAND
Format Mode Function
set igmp
snooping
response-
Global
config
This sets the snooping interval