Zte ZXR10 2920 - Configuring Basic ACL; Table 187 ACL Description; Table 188 ACL Basic Number Command; Table 189 Rule Command

ZXR10 2920/2928/2952
(V1.0) Access Switch User Manual （Volume I）
126 Confidential and Proprietary Information of ZTE CORPORATION
TABLE 187 ACL DESCRIPTION
ACL Description Access List Number
Basic ACL The range is from 1 to 99
Extended ACL The range is from 100 to 199
L2 ACL The range is from 200 to 299
Hybrid ACL The range is from 300 to 349
Global ACL 350
Each ACL has best 500 rules except that Global ACL has best 16
rules.
Configuring Basic ACL
This topic describes the basic ACL configuration number.
For basic ACL configuration, perform the following steps.
1. To enter into basic ACL configuration, use command
config acl basic number <acl-number> in global
configuration mode. This is shown in
Table 188.
TABLE 188 ACL BASIC NUMBER COMMAND
Format Mode Function
config acl basic
number <acl-
number>
global config This enters into
basic ACL
configuration mode
Result: This enters into basic ACL configuration mode.
2. To configure the rules of ACL, use command rule <rule-
id> {permit | deny} {<source-ipaddr wildcard> |
any}[fragment] in ACL config mode. This is shown in
Table 189.
TABLE 189 RULE COMMAND
Format Mode Function
rule <rule-id>
{permit | deny}
{<source-ipaddr
wildcard> |
any}[fragment]
ACL config This configures ACL
rules
Result: This configures ACL rules.
E
ND OF STEPS
Basic ACL has been configured.
Purpose
Steps
Result