Zte ZXR10 2920 User Manual

Chapter 7 Service Configuration
Confidential and Proprietary Information of ZTE CORPORATION 123
zte(cfg)#set vlan 10 add port 2 untag
zte(cfg)#set stp instance 1 bridgeprio 7
zte(cfg)#set stp instance 1 port 2 priority 112
zte(cfg)#show stp instance 0
RootID:
Priority : 32768 Address : 00. d0
.
d0. ff. ff. 0a
HelloTime(s) : 2 MaxAge(s) : 20
ForwardDelay(s): 15
Reg RootID:
Priority : 32768 Address : 00. d0
.
d0. ff. ff. 0a
RemainHops : 20
BridgeID:
Priority : 32768 Address : 00. d0
.
d0. ff. ff. 0a
HelloTime(s) : 2 MaxAge(s) : 20
ForwardDelay(s): 15 MaxHops : 20
Interface PortId Cost Status Role Bound
GuardStatus
--------- ------ --------- ------- ---------- ----- ----
-------
2 128.
2
200000 Discard Designated MSTP
None
zte(cfg)#show stp instance 1
RootID:
Priority : 1 Address : 00. d0
.
d0. ff. ff. 0a
HelloTime(s) : 2 MaxAge(s) : 20
ForwardDelay(s): 15 RemainHops : 20
BridgeID:
Priority : 1 Address : 00. d0
.
d0. ff. ff. 0a
HelloTime(s) : 2 MaxAge(s) : 20
ForwardDelay(s): 15 MaxHops : 20
Interface PortId Cost Status Role
GuardStatus
--------- ------ --------- ------- ---------- ----------
-
2 112. 2 200000 Discard Designated None
zte(cfg)#show stp port 2
The following ports are active!
PortId : 2 MSTI : 00
Priority : 128 Cost : 200000

Zte ZXR10 2920 Specifications

General

Jumbo Frame	9K Bytes
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Power Supply	AC 100-240V, 50/60Hz
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 95% non-condensing
Category	Switch