ZXR10 2920/2928/2952
(V1.0) Access Switch User Manual （Volume I）
48 Confidential and Proprietary Information of ZTE CORPORATION
Command Function
CTRL+N or ↓
Invoke a history command in the buffer backward
In the privileged mode, execute the show history command to
list the commands input the latest in this mode.
Function Key
ZXR10 2920/2928/2952 provides a lot of functional keys for the
user interface to facilitate user operations. Functional keys are
shown in
Table 19.
TABLE 19 FUNCTIONAL KEYS
Functional
Key
Usage
Ctrl-P or Ç
Recover the last command (Roll back in the
historical records of commands).
Ctrl-N or È
Recover the next command (Roll forward in the
historical records of commands).
Ctrl-B or Å
Move left in the command line currently indicated
by the prompt.
Ctrl-F or Æ
Move right in the command line where the prompt
is currently located.
Tab
Display commands starting with the character or
string. If there is only one command, make this
command a complete one.
Ctrl-A Skip to the beginning of the command line.
Ctrl-E Skip to the end of the command line.
Ctrl-K Delete the characters from the cursor to the end.
Ctrl-H or
Backspace
Delete the character on the left of the cursor.
Ctrl-C
Cancel the command and display the prompt
character.
Ctrl-L Clear screen.
Ctrl-Y Recover the last command executed.
Ctrl-Z Return to the global configuration mode.
When the command output exceeds one page, output is split
into several pages automatically and the prompt “----- more ----
- Press Q or Ctrl+C to break -----” appears at the bottom of
current page. Press any key to turn pages or press Q or Ctrl+C
to stop the output.
User Interface
To Next Page
Loading...
