Zte ZXR10 2920 User Manual

ZXR10 2920/2928/2952
(V1.0) Access Switch User Manual （Volume I）
70 Confidential and Proprietary Information of ZTE CORPORATION
TABLE 40 PORT QUEUE-SCHEDULE COMMANDS
Format Mode
Function
set port <portlist>
queue-scedule
{WRR0|SP|WRR1-
SP|WRR2-SP}
Global
config
This sets packet type of
ingress direction
7. To set the priority of the source MAC address, use command
set port <portlist> sa-priority {enable|disable}
TABLE 41 THE PRIORITY OF THE SOURCE MAC ADDRESS ON COMMAND
Format Mode Function
set port
<portlist> sa-
priority
{enable|disable}
Global
config
This sets the priority of the source
MAC address.
Result: This sets the priority of the source MAC address.
8. To set the priority of the source VLAN, use command set
port <portlist> vlan-priority {enable|disable}.
TABLE 42 QUEUE-SCHEDULE COMMAND
Format Mode Function
set port
<portlist> vlan-
priority
{enable|disable}
Global
config
This sets port’s priority of the
source VLAN.
Result: This sets port’s queue-schedule profile.
9. To set the priority of a port, use command set port
<portlist> default-priority <0-7> in global configuration
mode. This is shown in
Table 43.
TABLE 43 DEFAULT-PRIORITY COMMAND
Format Mode Function
set port
<portlist>
default-
priority <0-7>
Global
config
This sets the priority of a port
Result: This sets the priority of a port.
12. To set remapping-tag priority of a port, use command set
port <portlist> remapping-tag <0-7>priority in global
configuration mode. This is shown in
Table 44.
TABLE 44 SET PORT SECURITY COMMAND
Format Mode Function

Zte ZXR10 2920 Specifications

General

Jumbo Frame	9K Bytes
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Power Supply	AC 100-240V, 50/60Hz
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 95% non-condensing
Category	Switch