Zte ZXR10 2920 - Table 45 Multicast-Filter Command; Table 46 Rate Advertisement Command; Table 47 Mac Address Command

Chapter 7 Service Configuration
Confidential and Proprietary Information of ZTE CORPORATION 71
Format Mode Function
set
port<portlist>
remapping-tag
<0-7> priority
<0-7>
Global
config
This sets remapping-tag priority
of a port.
Result: This sets remapping-tag priority of a port.
13. To set the port security, use command set port <portlist>
security {enable|disable} in global configuration mode.
This is shown in
Table 45.
TABLE 45 MULTICAST-FILTER COMMAND
Format Mode
Function
set port <portlist>
security
{enable|disable }
Global
config
This sets the multicast filter of a
port
Result: This sets the port security.
14. To enable or disable the port unit-statistics, use command
set port <portlist> unit-statistics {enable |disable} in
global configuration mode. This is shown in
Table 46.
TABLE 46 RATE ADVERTISEMENT COMMAND
Format Mode
Function
set port <portlist>
unit-statistics
{enable |disable}
Global
config
This sets the port unit-
statistics
Result: This sets the port unit-statistics.
15. To set the multicast-filter, use command set port
<portlist> macaddress {on <1-16>|off} in global
configuration mode. This is shown in
Table 47.
TABLE 47 MAC ADDRESS COMMAND
Format Mode Function
set port
<portlist>
macaddress {on
<1-16>|off}
Global
config
This sets multicast-filter
Result: This sets the number of MAC addresses.
16. To set port on Vlan, use command set port <portname>
description <string> in global configuration mode. This is
shown in
Table 48.