Chapter 7 Service Configuration
Confidential and Proprietary Information of ZTE CORPORATION 149
zte(cfg)#set pvlan session 2 add promis trunk 16 isolate-
trunk 1, 2, 3
zte(cfg)#show pvlan
pvlan session : 1
promiscuous-port: 16
isolated-port : 1-3
isolated-trunk :
pvlan session : 2
promiscuous-port: T16
isolated-port :
isolated-trunk : 1-3
pvlan session : 3
promiscuous-port:
isolated-port :
isolated-trunk :
pvlan session : 4
promiscuous-port:
isolated-port :
isolated-trunk :
zte(cfg)#
802. 1x Transparent Transmission
IEEE 802. 1x is a port-based network access control protocol.
Port-based network access control is a way to authenticate and
authorize the users connected to the LAN equipment. This
type of authentication provides a point-to-pint subscriber
identification method in the LAN.
ZXR10 2920/2928/2952 provides 802. 1x transparent
transmission function that allows the transparent transmission of
802. 1x protocol packets from the client to the authentication
server for authentication.
IEEE 802. 1x
To Next Page
Loading...
