Zte ZXR10 2920 - Table 113 Set Igmp Filter Command; Table 114 Set Igmp Filter Add Groupip Vlan Command; Table 115 Set Igmp Filter Delete Groupip Vlan Command; Table 116 Set Igmp Filter Add Sourceip Vlan Command

Chapter 7 Service Configuration
Confidential and Proprietary Information of ZTE CORPORATION 97
TABLE 113 SET IGMP FILTER COMMAND
Format Mode Function
set igmp filter
{enable|disable}
Global
config
This Enable/Disable the IGMP filter
Result: This Enable/Disable the IGMP filter.
5. To add filter on Vlan multicast group, use command set
igmp filter add groupip <A. B. C. D> vlan <vlanlist>
in global configuration mode. This is shown in
Table 114.
TABLE 114 SET IGMP FILTER ADD GROUPIP VLAN COMMAND
Format Mode Function
set igmp filter
add groupip
<A. B. C.
D> vlan
<vlanlist>
Global
config
This adds filter on Vlan multicast
group
Result: This adds filter on Vlan multicast group.
6. To delete source Ip of Vlan from filter, use command set
igmp filter delete groupip <A. B. C. D> vlan
<vlanlist> in global configuration mode. This is shown in
Table 115.
TABLE 115 SET IGMP FILTER DELETE GROUPIP VLAN COMMAND
Format Mode Function
set igmp filter
delete groupip
<A. B. C.
D> vlan
<vlanlist>
Global
config
This deletes source Ip of Vlan from
filter
Result: This deletes source Ip of Vlan from filter.
7. To add the filter of multicast source address based on
Vlan, use command set igmp filter add sourceip <A. B.
C. D> vlan <vlanlist> in global configuration mode. This
is shown in
Table 116.
TABLE 116 SET IGMP FILTER ADD SOURCEIP VLAN COMMAND
Format Mode Function
set igmp filter
add sourceip
<A. B. C.
D> vlan
<vlanlist>
Global
config
This adds the filter of multicast
source address based on Vlan
Result: This adds the filter of multicast source address
based on Vlan.