Zte ZXR10 2920 - Table 110 Set Igmp Snooping Vlan Delete Group Port Command; Table 111 Set Igmp Snooping Add Maxnum Vlan Command

ZXR10 2920/2928/2952
(V1.0) Access Switch User Manual （Volume I）
96 Confidential and Proprietary Information of ZTE CORPORATION
group <A. B. C. D> [port <portlist>| trunk <trunklist>]
in global configuration mode. This is shown in
Table 108.
TABLE 110 SET IGMP SNOOPING VLAN DELETE GROUP PORT COMMAND
Format Mode Function
set igmp
snooping vlan
<1-4094>
delete group
<A. B. C.
D>[ port
<portlist>|
trunk
<trunklist>]
Global
config
This unbinds static multicast group
from a VLAN
Result: This unbinds static multicast group from a VLAN.
17. To add maximum multicast group numbers to Vlan, use
command set igmp snooping add maxnum <1-256> vlan
<vlanlist> in global configuration mode. This is shown in
Table 111.
TABLE 111 SET IGMP SNOOPING ADD MAXNUM VLAN COMMAND
Format Mode Function
set igmp
snooping add
maxnum <1-
256> vlan
<vlanlist>
Global
config
This adds maximum multicast
group numbers to Vlan
Result: This adds maximum multicast group numbers to
Vlan.
18. To delete maximum multicast group number from Vlan,
use command set igmp snooping delete maxnum vlan
<vlanlist> in global configuration mode. This is shown in
Table 112.
TABLE 112 SET IGMP SNOOPING DELETE MAXNUM VLAN COMMAND
Format Mode Function
set igmp
snooping
delete
maxnum vlan
<vlanlist>
Global
config
This deletes maximum multicast
group number from Vlan
Result: This deletes maximum multicast group number from
Vlan.
4. To Enable/Disable the IGMP filter, use command set
igmp filter {enable|disable} in global configuration mode.
This is shown in
Table 113.