Zte ZXR10 2920 - Table 295 Clear Policy Qos Command; Table 296 Set Policy Policing Command; Table 297 Clear Policy Policing Command; Table 298 Set Policy Redirect Command

ZXR10 2920/2928/2952
(V1.0) Access Switch User Manual （Volume I）
182 Confidential and Proprietary Information of ZTE CORPORATION
3. To clear Qos remark, use command clear policy qos-
remark in sqinq-session <1-256> in global configuration
mode. This is shown in
Table 295.
TABLE 295 CLEAR POLICY QOS COMMAND
Format Mode Function
clear policy qos-
remark in sqinq-
session <1-256>
global config This clears Qos
remark
Result: This clears Qos remark.
4. To monitor traffic, use command set policy policing in
sqinq-session <1-256> policer <0-255> in global
configuration mode. This is shown in
Table 296.
TABLE 296 SET POLICY POLICING COMMAND
Format Mode Function
set policy policing
in sqinq-session
<1-256> policer
<0-255>
global config This monitors traffic
Result: This monitors traffic.
5. To clear traffic monitor, use command clear policy
policing in sqinq-session <1-256> in global configuration
mode. This is shown in
Table 297.
TABLE 297 CLEAR POLICY POLICING COMMAND
Format Mode Function
clear policy
policing in sqinq-
session <1-256>
global config This clears traffic
monitor
Result: This clears traffic monitor.
6. To redirect policy for traffic, use command set policy
redirect in sqinq-session <1-256> port < portname> in
global configuration mode. This is shown in
Table 298.
TABLE 298 SET POLICY REDIRECT COMMAND
Format Mode Function
set policy redirect
in sqinq-session
<1-256> port <
portname>
global config This redirects policy
for traffic
Result: This redirects policy for traffic.