Zte ZXR10 2920 - Table 81 Set Fdb Filter Command; Table 82 Show Fdb Command; Table 83 Show Fdb Agingtime Command

Chapter 7 Service Configuration
Confidential and Proprietary Information of ZTE CORPORATION 85
Format Mode Function
set fdb delete
<xx. xx. xx.
xx. xx. xx>
vlan <1-4094>
Global
config
This deletes a record in the table
Result: This deletes a record in the table.
4. To set the filter address of fdb, use command set fdb
filter<xx. xx. xx. xx. xx. xx>vlan<1-4094>
{dest_mac|src_mac|both}in global configuration mode.
This is shown in
Table 81.
TABLE 81 SET FDB FILTER COMMAND
Format Mode
Function
set fdb filter <xx. xx. xx.
xx. xx. xx>vlan<1-4094>
{dest_mac|src_mac|both}
Global
config
This sets the filter
address of fdb
Result: This sets the filter address of fdb.
5. To display fdb information, use command show fdb
[static|dynamic|filter] [detail] in global configuration
mode. This is shown in
Table 82.
TABLE 82 SHOW FDB COMMAND
Format Mode
Function
show fdb
[static|dynamic|filter]
{detail}
Global
config
This displays fdb information
Result: This displays fdb information.
6. To display the aging time of fdb address, use command
show fdb agingtime in global configuration mode. This is
shown in
Table 83.
TABLE 83 SHOW FDB AGINGTIME COMMAND
Format Mode Function
show fdb
agingtime
Global
config
This displays the aging time of fdb
address
Result: This displays the aging time of fdb address.
7. To display the MAC-based fdb information, use command
show fdb mac <xx. xx. xx. xx. xx. xx> in global
configuration mode. This is shown in
Table 84.