Zte ZXR10 2920 - Displaying Port Information; Table 54 Show Port Command; Table 55 Show Port Vlan Command; Table 56 Show Port Statistics Time Command

ZXR10 2920/2928/2952
(V1.0) Access Switch User Manual （Volume I）
74 Confidential and Proprietary Information of ZTE CORPORATION
Displaying Port Information
This topic describes the displaying of port information.
To view of port information, perform the following steps.
1. To display the configuration and work state of the port, use
command show port [<portlist>] in global configuration
mode. This is shown in
Table 54.
TABLE 54 SHOW PORT COMMAND
Format Mode Function
show port
[<portlist>]
Global
config
This displays the configuration and
work state of the port
Result: This displays the configuration and work state of the
port.
2. To displays Vlan information of the port, use command
show port <portlist> vlan in global configuration mode.
This is shown in
Table 55.
TABLE 55 SHOW PORT VLAN COMMAND
Format Mode Function
show port
<portlist> vlan
Global
config
This displays Vlan information of
the port
Result: This displays Vlan information of the port.
3. To display statistics information of the port in unit time, use
command show port <portlist> statistics
1min_unit|5min_unit in global configuration mode. This
is shown in
Table 56.
TABLE 56 SHOW PORT STATISTICS TIME COMMAND
Format Mode
Function
show port <portlist>
statistics
1min_unit|5min_unit
Global
config
This displays statistics
information of the port in unit
time
Result: This displays statistics information of the port in unit
time.
4. To display the QoS configuration data of the port, use
command show port <portlist> qos in global configuration
mode. This is shown in
Table 57.
TABLE 57 SHOW PORT QOS COMMAND
Format Mode Function
Purpose
Steps