EasyManua.ls Logo

Zte ZXR10 2920 - Page 139

Zte ZXR10 2920
341 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 7 Service Configuration
Confidential and Proprietary Information of ZTE CORPORATION 125
ACL rule can be added, deleted, sorted.
f Rule can be added to a configured ACL. Regular ID
number range is from 1-500 including Global ACL the
number ranges from 1 to 16.
f Configured ACL can be deleted regularly. If the
specified ACL’s access list number or rule number hasn’t
been configured, a false message will return.
f Many rules of an ACL can be sorted and defined where
the rule number is placed.
An ACL can become effective according to configuring time
range. After configuring absolute or relative time range on
the switch, time range can be applied to the rule of ACL.
This results in the rule to be in effect according to the time
range identified.
ZXR10 2920/2928/2952 provides the following five types of
ACL’s:
Basic ACL: Only match source IP address.
Extended ACL: Match the following items:
f source IP address, destination IP address, IP protocol
type, TCP source port number, TCP destination port
number, UDP source port number, UDP destination port
number, ICMP type, ICMP Code, DiffServ Code Point
(DSCP), ToS and Precedence.
L2 ACL: Match source MAC address, destination MAC
address, source VLAN ID, L2 Ethernet protocol type and
802. 1p priority value.
Hybrid ACL: Match the following items:
f source IP address, destination IP address, IP protocol
type, TCP source port number, TCP destination port
number, UDP source port number, UDP destination port
number, DiffServ Code Point (DSCP) L2 Ethernet
protocol type, source MAC address, destination MAC
address, source VLAN ID and 802. 1p priority value.
Global ACL: Match the following items:
f Physical port number, source IP address, destination IP
address, IP protocol type, TCP source port number, TCP
destination port number, UDP source port number, UDP
destination port number, DiffServ Code Point (DSCP) L2
Ethernet protocol type, source MAC address, destination
MAC address, source VLAN ID and 802. 1p priority
value.
Each ACL has an access list number to identify. The access list
number is a number. The access list number ranges of
different types of ACL’s are shown in
Table 187.
Five Types of
ACL
ACL
Description

Table of Contents

Related product manuals