Zte ZXR10 2920 - Page 114

ZXR10 2920/2928/2952
(V1.0) Access Switch User Manual （Volume I）
100 Confidential and Proprietary Information of ZTE CORPORATION
Configuration
zte(cfg)#set vlan 200 add port 1, 3, 5, 10 untag
zte(cfg)#set vlan 210 add port 1, 10 untag
zte(cfg)#set vlan 230 add port 3, 10 untag
zte(cfg)#set vlan 250 add port 5, 10 untag
zte(cfg)#set port 10 pvid 200
zte(cfg)#set port 1 pvid 210
zte(cfg)#set port 3 pvid 230
zte(cfg)#set port 5 pvid 250
zte(cfg)#set vlan 200, 210, 230, 250 enable
zte(cfg)#set igmp snooping enable
zte(cfg)#set igmp snooping add vlan 200, 210, 230, 250
zte(cfg)#set igmp snooping crossvlan disable
Multicast snooping result
zte(cfg)#show igmp snooping vlan
Num VlanId Group Last
_
Report
PortMember
1 210 224. 1. 1. 1 192. 168. 1.
1 1
2 230 224. 1. 1. 1 192. 168. 1.
2 3
3 250 224. 1. 1. 1 192. 168. 1.
3 5
Enable multi-VLAN IGMP snooping function of the switch and
display the snooping results:
zte(cfg)#set igmp snooping crossvlan enable
zte(cfg)#show igmp snooping vlan
Num VlanId Group Last
_
Report
PortMember
1 210 224. 1. 1. 1 192. 168. 1.
1 1
2 230 224. 1. 1. 1 192. 168. 1.
2 3
3 250 224. 1. 1. 1 192. 168. 1.
3 5
4 200 224. 1. 1. 1 192. 168. 1.
3 1, 3, 5, 10
This example describes IGMP snooping and filter. Port 1, 3, 5
connected to the host. Port 10 is connected to the router.
Port 1, 3, 5 join port 10 to Vlan 200. Port 1, 3, 5 on user
transmits the group address separately for 230. 44. 45. 167,
230. 44. 45. 157 multicast joins the request, increases