Zte ZXR10 2920 - Page 190

ZXR10 2920/2928/2952
(V1.0) Access Switch User Manual （Volume I）
176 Confidential and Proprietary Information of ZTE CORPORATION
zte(cfg-nas)#dot1x re-authenticate enable
zte(cfg-nas)#dot1x re-authenticate period 3600
zte(cfg-nas)#show dot1x
TxPeriod : 30 QuietPeriod
: 60
SuppTimeout
:
30
ServerTimeout : 30
ReAuthPeriod
:
3600
ReAuthenticate : enabled
MaxReq : 2
zte(cfg-nas)#
Set the authentication control state of port 1 to auto and
authentication mode to CHAP. Enable multi-subscriber access.
Maximum number of subscriber accessed is 5.
zte(cfg-nas)#aaa-control port 1 port-mode auto
zte(cfg-nas)#aaa-control port 1 protocol chap
zte(cfg-nas)#aaa-control port 1 multiple-hosts enable
zte(cfg-nas)#aaa-control port 1 max-hosts 5
zte(cfg-nas)#show aaa-control 1
PortId
:
1
PortControl : auto
Dot1x
:
enabled
AuthenticationProtocol : chap
KeepAlive
:
enabled
KeepAlivePeriod : 10
Accounting
:
disabled
MultipleHosts :
enabled
MaxHosts
:
5
HistoryHostsTotal : 0
OnlineHosts : 0
Configure RADIUS domain 188 according to the following
requirements:
 Authentication server address and accounting server address:
10. 40. 92. 212 and 10. 40. 92. 215
 Share Password: 123456
 Client IP address: 10. 40. 92. 100. Use default domain.