Parameters 111
44 Maintenance Maintenance counter configuration. 221
45 Energy optimising Energy optimization settings. 227
47 Voltage ctrl Overvoltage and undervoltage control settings. 228
49 Data storage Data storage parameters reserved for the user. 228
50 Fieldbus Settings for configuration of communication via a fieldbus adapter. 229
51 FBA settings Fieldbus adapter-specific settings. 231
52 FBA data in Selection of data to be transferred from drive to fieldbus controller via
fieldbus adapter.
232
53 FBA data out Selection of data to be transferred from fieldbus controller to drive via
fieldbus adapter.
233
56 Panel display Selection of signals to be displayed on control panel. 233
58 Embedded Modbus Configuration parameters for the embedded fieldbus (EFB) interface. 234
64 Load analyzer Peak value and amplitude logger settings. 238
75 Pump logic Configuration settings for the pump station. 241
76 MF communication Communication configuration for applications consisting of multiple
pumps with dedicated drives.
250
77 Pump sleep Sleep function settings. 254
78 Pump autochange Pump Autochange and interlock settings. 257
79 Level control Settings for level control applications. 262
80 Flow calculation Settings for the flow calculation function. 267
81 Pump protection Settings for pump protection functions. 271
82 Pump cleaning Settings for the pump cleaning sequence. 278
83 Energy monitoring Energy consumption monitoring settings. 280
94 Ext IO conf I/O extension configuration. 281
95 Hw configuration Diverse hardware-related settings. 281
97 User motor par Motor values supplied by the user that are used in the motor model. 282
99 Start-up data Language selection, motor configuration and ID run settings. 283
Group Contents Page
To Next Page
Loading...
