262 Parameters
Reset Resets parameter 04.28 Pump runtime.2
78.15 Runtime diff Maximum pump runtime difference between drives. The
control program will compare the value of the runtime
counter (parameter 04.28 Pump runtime) in each drive and
attempt to keep the difference below this value.
0 … 2147483647 h Maximum runtime difference between drives. 100 = 1 h
79
79 Level control
Settings for level control applications.
See also section Level control macro (page 102).
79.01 Level mode Defines whether the pump station is used for emptying or
filling a container.
Off Level control disabled. 0
No. Name/Value Description FbEq
To Next Page
Loading...
