ABB ACQ810 - Analogue Outputs

158 Parameters
Running Bit 3 of 06.01 Status word1 (see page 126). 1073939969
Alarm Bit 7 of 06.01 Status word1 (see page 126). 1074202113
Ext2 active Bit 8 of 06.01 Status word1 (see page 126). 1074267649
Fault Bit 10 of 06.01 Status word1 (see page 126). 1074398721
Fault(-1) Bit 12 of 06.01 Status word1 (see page 126). 1074529793
Ready relay Bit 2 of 06.02 Status word2 (see page 127). 1073874434
RunningRelay Bit 3 of 06.02 Status word2 (see page 127). 1073939970
Ref running Bit 4 of 06.02 Status word2 (see page 127). 1074005506
Charge ready Bit 9 of 06.02 Status word2 (see page 127). 1074333186
Neg speed Bit 0 of 06.03 Speed ctrl stat (see page 128). 1073743363
Zero speed Bit 1 of 06.03 Speed ctrl stat (see page 128). 1073808899
Above limit Bit 2 of 06.03 Speed ctrl stat (see page 128). 1073874435
At setpoint Bit 3 of 06.03 Speed ctrl stat (see page 128). 1073939971
Supervision1 Bit 0 of 06.13 Superv status (see page 129). 1073743373
Supervision2 Bit 1 of 06.13
Superv status (see page 129). 1073808909
Supervision3 Bit 2 of 06.13 Superv status (see page 129). 1073874445
Const Bit pointer setting (see Terms and abbreviations on page
109).
-
Pointer
14.72 DIO invert mask Inverts status of digital input/outputs as reported by 02.03
DIO status.
15
15 Analogue outputs
Selection and processing of actual signals to be indicated
through the analog outputs.
See also section Programmable analog outputs on page 65.
15.01 AO1 src Selects a drive signal to be connected to analog output AO1.
Speed rpm 01.01 Motor speed rpm (see page 112). 1073742081
Speed % 01.02 Motor speed % (see page 112). 1073742082
Frequency 01.03 Output frequency (see page 112). 1073742083
Current 01.04 Motor current (see page 112). 1073742084
Current % 01.05 Motor current % (see page 112). 1073742085
Torqu e 01.06 Motor torque (see page 112 ). 1073742086
Dc-voltage 01.07 Dc-voltage (see page 112 ). 1073742087
No. Name/Value Description FbEq
Bit Name
0 1 = Invert DIO1
1 1 = Invert DIO2
2 1 = Invert DIO3 (on optional FIO-01 I/O Extension)
3 1 = Invert DIO4 (on optional FIO-01 I/O Extension)
4 1 = Invert DIO5 (on optional FIO-01 I/O Extension)
5 1 = Invert DIO6 (on optional FIO-01 I/O Extension)
6 1 = Invert DIO7 (on optional FIO-01 I/O Extension)
7 1 = Invert DIO8 (on optional FIO-01 I/O Extension)
8 1 = Invert DIO9 (on optional FIO-01 I/O Extension)
9 1 = Invert DIO10 (on optional FIO-01 I/O Extension)