ABB ACQ810 - Ext IO Conf; Hw Configuration

Parameters 281
Average The current energy monitoring period (parameter 05.20 kWh
current read) is compared to the average of the two previous
periods (05.21 kWh prev read and 05.22 kWh posprev read).
3
83.02 Mon period Defines the length of an energy monitoring period. The first
period starts when the drive is powered up.
0.00 … 35791394.11
h
Length of monitoring period. 1 = 1 min
83.03 kWh limit Consumed energy limit for parameter 83.01 Energy mon
mode, selection Limits.
0…2147483647
kWh
Energy limit. 1 = 1 kWh
83.04 Mon tolerance Tolerance for energy limit. The energy consumption may
exceed the reference energy by this tolerance value until the
action defined by parameter 83.05 Energy mon ctrl is taken.
0…2147483647
kWh
Tolerance. 1 = 1 kWh
83.05 Energy mon ctrl Defines the action that is taken if the energy consumption
exceeds the tolerance limits.
Not sel No action taken. 0
Alarm The drive generates alarm ENERGY LIMIT.1
83.06 Energy reset Resets the energy monitoring counters.
No No reset. The parameter automatically reverts to this value
after a reset.
0
Period Resets the periodic energy counters (parameters
05.20…05.22).
1
Month Resets the monthly energy counters (parameters
05.23…05.35).
2
94
94 Ext IO conf
I/O extension configuration.
94.01 Ext IO1 sel Activates an I/O extension installed into Slot 1. Depending
on the module used, enables
• digital input DI7
• digital input/outputs DIO3…DIO6
• analog inputs AI3…AI5
• analog output AO3 or
• relay outputs RO3…RO6.
None No extension installed into Slot 1. 0
FIO-01 FIO-01 extension installed into Slot 1. Additional 4 × DIO
and 2 × RO are in use.
1
FIO-11 FIO-11 extension installed into Slot 1. Additional 2 × DIO,
3 × AI and 1 × AO are in use.
2
FIO-21 FIO-21 extension installed into Slot 1. Additional 1 × DI,
1 × AI and 2 × RO are in use.
3
FIO-31 FIO-31 extension installed into Slot 1. Additional 4 × RO are
in use.
4
95
95 Hw configuration
Diverse hardware-related settings.
95.01 Ctrl boardSupply Selects how the drive control unit is powered.
No. Name/Value Description FbEq