Parameters 193
lbsi lbsi 61
mm 72
inch inch 73
28.07 Act FBA scaling Defines a divisor for process actual value for fieldbus. This
parameter can be used to improve calculation accuracy at
low and high values.
Not used No scaling applied. 0
Src/10 The actual value is divided by 10 for fieldbus. 1
Src/100 The actual value is divided by 100 for fieldbus. 2
Src/1000 The actual value is divided by 1000 for fieldbus. 3
29
29 Setpoint sel
Process setpoint (reference) settings.
29.01 Setpoint 1 / 2 sel Selects the process setpoint (1 or 2). Alternatively, selects a
source whose status determines which process setpoint is
used (0 = Setpoint 1; 1 = Setpoint 2).
Setpoint 1 Setpoint 1 selected. 0
Setpoint 2 Setpoint 2 selected. 1
DI1 Status of digital input DI1 (as indicated by 02.01 DI status, bit
0) determines which process setpoint is selected.
1073742337
DI2 Status of digital input DI2 (as indicated by 02.01 DI status, bit
1) determines which process setpoint is selected.
1073807873
DI3 Status of digital input DI3 (as indicated by 02.01 DI status, bit
2) determines which process setpoint is selected.
1073873409
DI4 Status of digital input DI4 (as indicated by 02.01 DI status, bit
3) determines which process setpoint is selected.
1073938945
DI5 Status of digital input DI5 (as indicated by 02.01 DI status, bit
4) determines which process setpoint is selected.
1074004481
Const Bit pointer setting (see Terms and abbreviations on page
109).
-
Pointer
29.02 Setpoint 1 src Selects the source of process setpoint 1.
Zero No source selected. 0
AI1 scaled 02.05 AI1 scaled (see page 113). 1073742341
AI2 scaled 02.07 AI2 scaled (see page 113). 1073742343
AI3 scaled 02.09 AI3 scaled (see page 113). 1073742345
AI4 scaled 02.11 AI4 scaled (see page 114). 1073742347
AI5 scaled 02.13 AI5 scaled (see page 114). 1073742349
FBA setpoint 02.40 FBA setpoint (see page 122). 1073742376
Shared sig2 02.44 Shared signal 2 (see page 122). 1073742380
Int set 1 29.04 Internal set 1
(see below). 1073749252
Pointer Value pointer setting (see Terms and abbreviations on page
109).
-
29.03 Setpoint 2 src Selects the source of process setpoint 2.
Zero No source selected. 0
AI1 scaled 02.05 AI1 scaled (see page 113). 1073742341
AI2 scaled 02.07 AI2 scaled (see page 113). 1073742343
No. Name/Value Description FbEq
To Next Page
Loading...
