ABB ACQ810 - Contents; Terms and Abbreviations

12 About the manual
Contents
The manual consists of the following chapters:
• The ACQ810 control panel provides a description and instructions for use of the
control panel.
• Control locations describes the control locations and operation modes of the
drive.
• Program features contains descriptions of the features of the ACQ810 standard
program.
• Application macros contains a short description of each macro together with a
connection diagram.
• Parameters describes the parameters of the drive.
• Additional parameter data contains further information on the parameters.
• Fault tracing lists the alarm (warning) and fault messages with possible causes
and remedies.
• Control through the embedded fieldbus interface describes the communication to
and from a fieldbus network using the embedded fieldbus interface.
• Control through a fieldbus adapter describes the communication to and from a
fieldbus network using an optional fieldbus adapter module.
• Control block diagrams contains a graphical representation of the control
program.
Terms and abbreviations
Term/abbreviation Definition
AI Analog input; interface for analog input signals
AO Analog output; interface for analog output signals
DC link DC circuit between rectifier and inverter
DI Digital input; interface for digital input signals
DIO Digital input/output; interface for digital input or output signals
DO Digital output; interface for digital output signals
DTC Direct torque control
EFB Embedded fieldbus
FBA Fieldbus adapter
FIO-11 Optional analog I/O extension module
FIO-21 Optional analog/digital I/O extension module
FIO-31 Optional digital I/O extension module
FDNA-0x Optional DeviceNet adapter
FENA-0x Optional Ethernet/IP adapter
FLON-0x Optional L
ONWORKS
®
adapter
FPBA-0x Optional PROFIBUS DP adapter
FSCA-0x Optional Modbus adapter