ABB ACS2000 - Page 163

ACS2000 User manual 2UEA001270 Rev. F 9-7 (24)
Chapter 9 - CDP control panel
9.3.2.2 Displaying three actual signals
9.3.2.3 Selecting actual signals
1 To display the full
name of three actual
signals, press and
hold the ACT key.
2 To return to the actual
signal display, release
the ACT key.
1 L ->
600.0 rpm
StateINU
MOTOR SPEED
POWER
1 To select the actual
signal display, press
the ACT key.
2 To select a row where
the actual signal is to
be displayed, press
the corresponding
slow navigation
key. A blinking cursor
indicates the
selected row.
1 L ->
600.0 rpm
StateINU
MOTOR SP
POWER
ReadyRun
600.00 rpm
75.0 kW
1 L ->
600.0 rpm
StateINU
MOTOR SP
ReadyRun
600.00 rpm
75.0 kW
POWER