ABB ACS2000 - Page 164

9-8 (24) 2UEA001270 Rev. F ACS2000 User manual
Chapter 9 - CDP control panel
3 To enter the actual
signal selection
function, press the
ENTER key.
4 To select a parameter
group, press the
corresponding fast
navigation key.
5 To select an actual
signal, press the
corresponding slow
navigation key.
6 To accept the
selection and to return
to the actual signal
display mode, press
the ENTER key.
1 L ->
600.0 rpm
1 ACTUAL SIGNALS
15 POWER
0.0 kW
1 L ->
600.0 rpm
1 ACTUAL SIGNALS
01 DC VOLTAGE
1000 V
1 L ->
600.0 rpm
2 ACTUAL SIGNALS
05 NP VOLTAGE
1000 V
1 L ->
600.0 rpm
StateINU
MOTOR SP
NP VOLT
ReadyOn
0.00 rpm
0 V