ABB ACS2000 - Page 165

ACS2000 User manual 2UEA001270 Rev. F 9-9 (24)
Chapter 9 - CDP control panel
9.3.2.4 Displaying a fault and resetting the fault history
7 To cancel the selection
and keep the original
selection, press any of
the mode keys.
The selected CDP
control panel mode is
entered.
1 To enter the actual
signal display mode,
press the ACT key.
2 To enter the fault
history display, press
either of the fast
navigation keys.
3 To select the previous
or next fault, press the
corresponding slow
navigation key. The
up key selects the
previous, the down
key the next fault.
1 L ->
600.0 rpm
StateINU
MOTOR SP
POWER
ReadyOn
0.00 rpm
0.0 kW
1 L ->
600.0 rpm
StateINU
MOTOR SP
POWER
ReadyOn
0.00 rpm
0.0 kW
1 L ->
600.0 rpm
1 LAST FAULT
+ PANEL LOST
0707730 12:30:02.3256
1 L ->
600.0 rpm
2 LAST FAULT
+ AMC: Fault Class 1
9 H 38 MIN 48 S